Publish Time: 2022-03-16 Origin: Site
The function of the Acoustic Slat Wall Panel is to have the effect of sound insulation and noise reduction in interior decoration. Nowadays, Acoustic Slat Wall Panel materials are often used in homes, KTVs, opera houses, conference rooms, movie theaters, and other places. In the design of indoor acoustics, the application of Acoustic Slat Wall Panel is also more and more extensive. Next, let's take a look at the installation precautions of the Acoustic Slat Wall Panel. Here are some answers.
Here is the content list:
l What should I pay attention to when cutting the Acoustic Slat Wall Panel?
l Reduce the precautions for Acoustic Slat Wall Panels and installation of Acoustic Slat Wall Panels.
Generally, in addition to the quality of the Acoustic Slat Wall Panel itself, the installation process also requires professionalism. Poor installation will lead to the inability to achieve the sound insulation effect. Therefore, we need to pay attention to cutting the Acoustic Slat Wall Panel when installing it. Gypsum board is much stronger, so it cannot be cut with a paper-knife like a gypsum board, but it can be cut with a general electric saw or a hand-held saw. The method is to first draw a line symbol on the surface of the Acoustic Slat Wall Panel to be cut, and then cut it along the line of the symbol with an electric saw or hand-held data (the saw teeth should be dense). If a lot of dust occurs during incision, it is recommended to wear a mask.
To reduce the rigid connection between the Acoustic Slat Wall Panel and the ground, a gap of 2 to 3 mm should be left between the sound insulation board and the ground during installation. Put a 2 to 3mm thick three-ply board on the bottom of the Acoustic Slat Wall Panel. After installing the sound insulation board, pull out the three-ply board. Under normal circumstances, there are gaps between the two wall panels. Therefore, before installing the next Acoustic Slat Wall Panel, apply a soundproof sealant with a width of about 10 mm on the edge of the previous Acoustic Slat Wall Panel. When installing, squeeze the Acoustic Slat Wall Panel tightly against the front acoustic panel, and the sealant between the two panels will completely seal the gap.
If there is excess sealant squeezed out of the gap, it can be scraped away with a scraper. Repeat the above process to install Acoustic Slat Wall Panel on one side of the keel. Use a sealant to completely seal the above gap. Along with these gaps, use a caulking gun to punch out a strip of sealant for sealing. After installing the wall on the side of the keel, install rock wool in the cavity in the keel. Filling rock wool in the keel can improve the sound insulation of the wall by 2 to 3 decibels. The thickness of the filled rock wool is generally about 75% of the thickness of the keel cavity. For example, 75mm thick rock wool is filled in 100 keels. Then on the other side of the keel, install gypsum board in the same way according to the sound insulation requirements of the wall.
Our official website is https://www.thstar-acoustic.com/. If you are engaged in work related to Acoustic Slat Wall Panel or want to learn more about our company, you can communicate with us on the website.