Publish Time: 2022-06-27 Origin: Site
Because the ceiling panel has many types, smooth lines, rich colors, good appearance, and it has the characteristics of fire resistance, moisture resistance, easy installation, easy cleaning, etc., designers and customers can choose the ceiling panel according to the color of the furniture and the color of the floor. The welcome is now recognized by the world.
Here is the content list:
How to install the ceiling panel?
What are the precautions when choosing and installing the ceiling panel?
1. Install the corner series according to the same level. 2. Hoist light steel keels (38 or 50 keels) at appropriate intervals, generally 1-1.2 meters apart, and the distance of the booms is distributed according to the regulations of light steel keels. 3. The hanging parts pre-installed on the gusset keel, together with the gusset keel, are closely attached to the light steel keel and buckled under the light steel keel in a vertical direction. The distance between the gusset keel is generally 1 meter, and it must be installed after all adjust the level (under normal circumstances, when the vertical distance between the building and the ceiling panel to be hoisted does not exceed 600mm, it is not necessary to add 38 keels or 50 keels in the middle, but use keel hangers and booms to connect directly). 4. Fasten the gusset plates parallel to the supporting keel in sequence, and connect the gusset plates with special keel series connectors. 5. When installing the ceiling panel, you must wear gloves. If you accidentally leave fingerprints or stains, you can wash them with detergent and boiled water and wipe them dry. A good installation process is easy to remove.
Generally, customers can choose the panel type they like according to the size of their room, or choose the appropriate ceiling panel type according to the designer's suggestion. There are long-direction paving and firm-direction paving in the direction of the top, but there is no such saying for square slabs. Divide the size of the length or solid direction by the width of each board to get the required quantity. Remember not to only look at the thickness of the ceiling panel, not the material. For example, the thickness of ordinary home decoration slats abroad are 0.5, 0.6, and rarely reach 0.8mm. The fundamental reason is that the aluminum alloy material used by others is good, and it doesn’t need to be very thick. Enough, even if there is a home improvement strip buckle, the span will not be very large, and there is no need to use such a thick one. If economic conditions permit, you can consider the film-covered ceiling panel, which will be easy to scrub in the kitchen and bathroom in the future, and it will not change color over time. The installation can be considered by the manufacturer, or it can be installed by a decoration worker.
Jiangsu Th-Star Acoustic Material Co., Ltd mainly produces acoustic boards, ceiling panels, decorative panels, etc. It has good sound absorption performance and zero formaldehyde.