Acoustic Slat Wall Panel installation knowledge and preparations

To achieve a good sound insulation effect, the installation method of Acoustic Slat Wall Panel must be very simple, otherwise, it will be difficult to achieve the ideal sound insulation effect. Professional acoustic engineers know that if a wall can be soundproofed by X decibels when tested in a laboratory, it can only be soundproofed by X-2 decibels in actual engineering, and the sound insulation effect is even lower. Next, let's take a look at the installation knowledge and preparations of the Acoustic Slat Wall Panel. Here are some answers.

Here is the content list:

l Knowledge of installing Acoustic Slat Wall Panel.

l Preparations before installing Acoustic Slat Wall Panel.

Knowledge of installing Acoustic Slat Wall Panel.

The use of an Acoustic Slat Wall Panel not only achieves the decorative effect but also guarantees the quality of the building. The sound insulation and noise reduction effect of the Acoustic Slat Wall Panel depends greatly on the quality of the installation. Since in theory, any board has a certain sound insulation effect, installation becomes even more important. For the installation of the Acoustic Slat Wall Panel, we also need to see whether the installation location is on the wall or the ceiling. Generally speaking, the sound-absorbing panels of the installed wall should be fixed to prevent it from falling. The Acoustic Slat Wall Panel of the ceiling must ensure the support performance of the light steel keel.

Preparations before installing Acoustic Slat Wall Panel.

To ensure the design effect, the following preparations must be completed before installing the Acoustic Slat Wall Panel: the installation site must be dry, and the minimum temperature should not be lower than 10 degrees Celsius. The maximum humidity change value of the installation site after installation should be controlled within the range of 40% to 60%. The installation site must meet the temperature and humidity standards specified above at least 24 hours before installation. In addition, check the model, size, and quantity of the Acoustic Slat Wall Panel. The Acoustic Slat Wall Panel must be placed in the place to be installed for 48 hours so that the Acoustic Slat Wall Panel can adapt to the indoor environment.

The walls covered by Acoustic Slat Wall Panel must be installed with keels according to the requirements of the design drawings or construction drawings, and the keels must be leveled. The surface of the keel should be flat, smooth, free of rust and deformation. The structural walls must be pre-constructed by the building codes, and the arrangement size of the keel must be compatible with the arrangement of the Acoustic Slat Wall Panel. The spacing between wooden keels should be less than 300mm, and the spacing between light steel keels should not be greater than 400mm. The installation of the keel should be perpendicular to the length of the Acoustic Slat Wall Panel. The distance between the surface of the wooden keel and the base layer is according to specific requirements, generally 50mm. The flatness and perpendicularity error of the edge of the wooden keel should not be greater than 0.5mm. If fillers are needed in the gap between the keels, they should be installed and treated in advance according to the design requirements, and ensure that the installation of the Acoustic Slat Wall Panel is not affected.

If you are interested in purchasing Acoustic Slat Wall Panel, you can contact us at any time, our website is https://www.thstar-acoustic.com/. We will wholeheartedly provide users with more and better services with high-quality products, good services, and competitive prices!